Ok here we go!!!!! oN THE BACK OF THE PANEL THAT HOLDS YOUR TIMER AND ALL THE CONTROLS THERE ARE TWO SREWS IN EACH CORNER OF IT, remove those srews roll your controls backwards there are two metal clips on the cabinet insert about anything into the end of the clip pry it back and it will pop out do both of these this way , unplug your lid switch and lean the whole cabinet forward to remove it, your pump is right in the front under the tub, two hoses go to it, if there is water in the tub when you remove the top hose it will drain all the water out on you so be ready, there are two clips that hold the pump on they are inserted into the motor get some pliers and get them off pay attention to where they go, clean the pump out if anything is in it, also check your discharge hose and besure there is nothing in it as well , the hose that goes from the tub to the pump may have a sock or something else in it make sure all the system is clean and reassemble, if this does not fix the problem then it is possible that it is the pump or a problem with your drain.
Let me know how it goes Im here for ya!!!!! | 
