[sixfiveguy40]

My washer will fill with water but it will not wash.

[PS Staff - Sheila]

Can you hear the motor running?

Will the washer drain and spin?

Here is a link to your washer model CW7000W.

[sixfiveguy40]

Yes I can here the motor and it will spin.

[PS Staff - Sheila]

Tilt the washer back and remove the belt.

Remove the cap that is in the center of the pulley.

Check the cam for wear.

Give the pulley a quick turn clock wise to see if the cam is engaging.

Reinstall the belt.

Remove the front panel by taking a putty knife and releasing the clips that are between the top and the front panel.

The clips are about two to three in from the side.

Put the washer in a cycle and see if the break is releasing.