[Leni]

My basket is unhooked on one corner. How do I remove front panel of washer to rehook it. it is unattached on bottom left back corner. Can't wash without a awful banging. Thanks

[John Bosox]

Not sure if yours is like mine, but the front of mine is attached to the top by 2 spring clips (1 at each corner). Run a putty knife along the slot between the top and front panel until you hit the clip, then use the putty knife to push in on the clip while gently pulling out on the front panel. Panel can be tilted out and then lifted off the 2 tabs at the bottom. Pops back in easily. Hope this helps.

[Leni]

Thank you very much. Worked and is now running fine again thanks again