[sseeman]

Ok heres what happening I get a ND code on the last rinse cycle? All the water dose drain out with no problem durning the last few minutes of the rinse cycle then the ND code show up and then it spins out and the clothes are dry!!!!! So i reset it to start a new load and the washer will not fill and will run all the way threw to the rinse cycle with no water but when the rinse cycle calls for water if fills and then completes the wash with the ND code. What i am thinking that their is some kind of switch that tell it that their is still water in the unit but their is not!!!!!! So any body have any ideas??????
Thanks
Nebraska guy Steve

[denman]

Here is the parts breakdown, includes a schematic
Maytag MAH6500AWW

And here is the service manual
http://www.servicematters.com/maytag...s/16010061.pdf

Does sound like you are on the right track

[sseeman]

Yes it is the pressure Switch. Was full of dirt and cleaned it out. It works now but over fills so i know that the switch is bad!!!!! But when i look at the parts list it wants the series # and i do not have a series #. Model # is MAH6500AWW Serial # 249876762CJ but no series # they said that its usually the first 2 letter of the serial # which is 24 But no part can be found for that series? HELP?????
Thanks