[netman2531]

I am about to replace the mixing valve but do not have a repair manual. I am pretty handy but looking to see if there are any gotchas before I attempt this.

[PS Staff - Sheila]

If you know how the washer comes apart there are no gotchas.

To open up the washer remove the two screws in the console and flip it up toward the wall.

In each corner of the cabinet you will see a brassy clip.

With a flat blade screwdriver release the clips.

Disconnect the lid switch wiring harness.

Open the lid of the washer and grasp the cabinet and tilt it toward you and lift at the same time.

Here is a link to your washer model LSQ9010LW0.