[werner234]

My kenmore calyaspo elite leaks in the agitating mode removing the back couldn't detest any leaks on hoses,pump , all connections seam to be tight. ??

[patron]

Hello werner234,

In this machine this not an easy task; but I would reccommend removing all of the panels you can remove without disrupting the machines performance. I will offer a link to the Calypso. Then you can determine where the water is coming from.

After that we can figure out how to fix the problem.

[kayakcrzy]

Let me see if I can help you before you remove all the panels. The first thing I want you to check is the drain hose. Make sure that the drain hose is in only about 10 or 12 inches, because if the water sphons out, you will get what they call splash over. Therefore it will only leak in the wash cycle. Does it leak all the time, or some of the time. I can be reached at my web site at ApplianceEducator.com Tom

[werner234]

Tom Paone;
The hose is approximately 10-12" into the drain, also the drain is 4' from the ground level

[kayakcrzy]

Well all the is good. The only thing you can do is do what I would do, and that is open the panel, and watch it. This is not cut and dry. Tom

[werner234]

Tom;
Thanks for the quick response. wiil ckeck
werner234