Remove the front panel of your washer.
Disconnect the wiring harness from the motor.
Remove the hoses off the pump.
There will be water in the hoses so have a bucket and rags ready.
Remove the mounting bolts.
Pull the motor and pump assembly out and turn over.
Remove the three bolt that hold the pump to the motor.
Pull the pump off the motor.
Place the belt around the pulley and make sure that the back leg of the pump has one side of the belt on each side of it.
Reassembly and put belt on the transmission pulley.
Can you please verify your model number as I can't locate it in our database? | 
How to replace drive belt 
