[kld9]

Ice maker stopped working two days ago. Water still dipenses from door. No water going into ice tray. Does not appear to be running at all. Where do I start.

[PS Volunteer - Appguy]

Measure freezer temperature, must be below 15 degrees. If ok go to the back of fridg,take off panel and pull out water solenoid. Temporarily swap the set of wires on two solenoids.
Go to the front and push water disenser for 9 seconds, water should fill up ice tray if it was empty. If no fill, check the fill tube in freezer for ice blockage, then check water output from solenoid by loostening the out put tubing.