[mrpoffe]

Water dispenser doesn't work. Ice maker works and dispenses perfectly. I checked the dual solenoid on the back with my ohm meter and both solenoids are fine so water should be flowing to the dispenser (the water flow valve assembly was replaced last your so I assume that it it fine). Is there an electrical switch on the dispenser that is faulty? If so, how do I get to this wiring as it would be behind the face plate on the front of the frig.

Thanks in advance for your help.

[PS Staff - Sheila]

Yes there are switches in the dispenser.

To remove the trim there are two slots a long the bottom edge.

With a flat blade screwdriver pry outward until the bottom releases.

Then slid the trim up and off.

This will give you access to the screws.

Here is a link to the parts of your fridge model 106.59599990.