"Condenser engine"...no such thing!!!! What it sounds like is frost build up possibly coming in contact with the evaporator fan blade. Frost may be building up as a result of a torn or mis-shapen door gasket, at a rate that the defrost cycle cannot handle. When you unplug it and let it sit for a while the frost melts away, and when you start it up again, the whole cycle starts over. Check your door gaskets near the hinges on both doors, and especialy the bottom of the fresh food door. Kool-ade or other sticky spill that are not cleaned off right away can cause gaskets to roll or tear which will allow moist air to be drawn inside. If the gaskets are sealing okay, it could be a problem with in adequate defrosting...possibly a bad defrost timer. |