[bear]

Weird problem - Time delay module went out on the front panel so I replaced that and started getting ice out the door again. But, I can't get water. I have checked the following: water from house is good. Water valves on fridge are good. Unhooked water line from valve and it actuated from the door switch. Reconnected line to valve = moved around front and disconneced at bottom of door. Put loose water line at bottom of fridge in a container and it filled from the door switch. So it appears the water is blocked somewhere in the door. Tried to blow canned air through just door line with no results. What could be blocking the line in the door? Is there a check valve or something in there? Could it be frozen solid? Thanks for any help.

[Phil]

I have the same problem with my fridge. Ice is produced and comes out from the dispenser but for some reason water does not come out. From time to time we have to turn on the lock. So I'm wondering if that has something to do with why the water does not come out. Also can the front panel around the dispensers be easily "popped" off?

[Phil]

I have the same problem with my fridge. Ice is produced and comes out from the dispenser but for some reason water does not come out. From time to time we have to turn on the lock. So I'm wondering if that has something to do with why the water does not come out. Also can the front panel around the dispensers be easily "popped" off? Mine is a Whirlpool Model ED5FHEXMT00.

[bear]

Phil,

sounds like you might have a different problem - I get water all the way through the system until I get to the door connection. The only panel on mine that comes off easily is located behind the selector switch cover on the freezer side. Pull the cover off and remove the four screws to access the time delay module board or the actuator. You may want to disconnect the line at the bottom of your fridge to see if your getting water that far through the system. If not check behind the veggie drawer to see if the supply tank is frozen.