Check switch
to see if broken off from bracket control, need to take off cover around ice &water door If there are no screws use a putty knife with the end wrapped with tape so the paint on the door panel is not scratched.
Start at the bottom of the trim and CAREFULLY pry the trim away from the door panel.
There may be small slots in the panel on the under side that the putty knife can be inserted into.
With the trim off the dispenser components can be serviced.
Check Bracket control
Part#2180226
Check Switch
Last edited by creekjumper : 04-25-2008 at 01:37 PM.
|