[DIMI]

First The Cooling Fan Starts to Run With My Hand Help. It was For A Week Or Two. After It Stops Runing At All. Now The Compressor And Coolong Fan Don't Run When I Put On The Fridge neither by hand help. Pls To Advice Or Send An Electric Diagram.thanks

[PS Volunteer - Appguy]

Should be a service paper somewhere tucked behind the kick panel under door..
Need to test things with a ohm meter, test cold control, defrost timer and power to it.
You have the infamous "mother " board that likes to fail. Also, it looks like you have a bad evaporator fan. You can check power to it and it's ohms right at the mother board per the schematic at the above web site.

[DIMI]

thanks! I found the problem at least. It was cooling fan fall. after fan stops the compressor overheat and the termo protector gauge switched off. so at least I do need to buy the compressor complect socket reley /T68CMU and P13HU/ in one socket and a new fan 5 KSM 51 AG. Because I don't live in States please to help me having the mentioned spare parts py post or some other way.

[PS Volunteer - Appguy]

Make sure you have proper voltage to both fan motors, evaporator and condenser.
A failure of either, will blow the mother board, can thank GE for this poor design.

[DIMI]

Originally Posted by PS Volunteer - Appguy

Make sure you have proper voltage to both fan motors, evaporator and condenser.
A failure of either, will blow the mother board, can thank GE for this poor design.

TYANKS. I HAVE DONE THIS ALREADY. I KNOW THE PROBLEM AND NEED TO HAVE A FAN NAD A COMPRESSOR SOCKET WITH TERMO AND START RELAYS IN ONE BODY /AS PER THE ORIGINAL ONE/ IF YOU CAN HALP ME HAVING THIS PART I WILL BE GRATEFUL A LOT.
BEST REGARDS
DIMI

[PS Volunteer - Appguy]

Look up parts in partselect.com