[carltond1069]

I need to replace the door closers and/or door stop as my doors do not close all the way.can you tell me how to go about doing this as I have no clue how to do it. I do know that I need to push the doors close as the last inch or two it won't do it by itself: I have a Maytag MZD2766GEB

[woodchuck]

Here's a digram of the parts. The magnetic door gaskets will usually hold the door in place while you take the hinge bracket and other parts apart. Just in case, slide something under the door that will hold it in the correct position. As you take parts off put the;m in order so you'll know how they go back. Inspect the parts to see which are broken. Usually the lower hinge pin.