[TimF4944]

Successfully installed a replacement heating element for a 6 year old Kenmore smooth top range. However, the light that indicates smooth top surface is still hot remains lit. I replaced the LF element, but it is the rear left element light that remains lit. I power cycled the range. The light still remains lit.

Any tips or tricks

[PS Staff - Sheila]

Was this happening before you replaced your element?

[TimF4944]

The Front Left element was not working and then the Left Rear element stopped working a short time later. I ordered parts from PartsSelect. While awaiting delivery, I did a continuity test on both elements. Front Left element failed while Left Rear element passed.


I replaced Front Left element and because Left Rear element passed, I decided to test both burners after replacing Front Left element only. Both burners work great, but when I shut them down the light that indicates surface area is still hot, remained lit for Left Rear element and has stayed lit for days. I power cycled the stove and it did not clear condition. I suspect temp sensor on Left Rear element, but that seems strange to me.

[PS Staff - Sheila]

Can you supply me with the rest of your model number please?

With any luck the wiring diagram will be listed I will need this to answer your question.