[Haroldc]

I have a Kenmore glass top slide in range. My top cracked and I have the replacement parts. I now need help on how to remove the old top and install the new one. I have not been able to find a diagram on how this is put together.

[PS Staff - Sheila]

Unplug the range.

Open the oven door and remove the screws that hold the top to the chassis.

Pull the cooktop forward far enough to unhook it from the top of the range.

Lift the front of the cooktop and rest it against the control panel. Make sure that the cooktop does not fall forward.

Remove the two screws from the hot surface indicator assembly bracket and remove the assembly form the frame.

Carefully lift the bottom of the left bracket just far enough to remove the bottom element, then repeat the procedure for the bottom right and center element. Lay each of the elements on top of the range.

Lift the brackets and remove the top two elements and lay them on top of the range.

Lift the element brackets and unhook them from the top of the cooktop.

Remove the old cooktop glass assembly from the range.

When reinstalling the elements in the new cooktop glass assembly make sure that the alignment pins are in their correct bracket slots.