[OmarG]

Doing some remodeling in the kitchen and had to move the electric range. After I moved it back the oven would not work. Pulled the back off and found one of the wires to the element had come loose. Unfortunately, it may have grounded out on the lower cabinet. Anyway, the oven works but now I have a problem with ALL the cooktop burners. The burners do come on but once they reach a certain point they shut off. If you set them on HIGH they stay on. I pulled the main circut board out and there are no obvious signs of damage. The clock works as do all the lights and LED indicators. I suspect I fried a solenoid or sensor in the cooktop. Question is what? Andbody got any ideas? P.S. Got the model # wrong. ART6002L

[kayakcrzy]

Omar, did you check the power going to the oven? Take the plate off where the plug goes into the range, and check the voltage, you could very well have a voltage problem. I could be reached at my website at ApplianceEducator.com Tom

[OmarG]

Checked voltage. O.K. What is a limiter? There is one on each burner element.

[kayakcrzy]

Omar, the limiter is attached to each burner. It works in conjuncting with the switch. So when you turn on a burner the switch sends the power to the burner, and the limiter sences the temperature of the element. I would find it very hard to believe that all 4 burners are not working correctly. Tom

[OmarG]

I tried wach burner. Turn it on, gets red, shuts down.