Oven Wont Hold Temp

dawgshawgs · 10-05-2007, 12:37 PM

Oven Comes On But Wont HoLd Temp Do I Need To Replace Control Panel Or T/stat Or Both

PS Staff - Sheila · 10-09-2007, 06:00 PM

Have you had any codes in the display?

It is likely the control.

Can you please supply the rest of your model number?

It should be on a tag with the serial number.

dawgshawgs · 10-31-2007, 02:25 AM

there are no codes in the display. I have purchased and installed the control and this did not repair the problem. what else should i try. Can I return the control? I need to get this fixed asap please advise. thanks

PS Staff - Sheila · 10-31-2007, 12:31 PM

Can you please supply the rest of your model number so I can see what your oven has for controls?

dawgshawgs · 10-31-2007, 04:00 PM

Jtp17soc2ss

PS Staff - Sheila · 10-31-2007, 04:23 PM

By control do you mean the clock?

There are two limit switches one is for the self-clean and the other is for normal oven temperature. It could be one of them that is opening when it is not suppose to.

You would have to check them with a meter when they are hot.

The temperature sensor can also be tested with a meter.

At room temperature you should get an ohms reading of 1100 ohms.

As the temperature goes up so does the resistance.

Will the oven come back on when it cools down?

Oven Wont Hold Temp

"Oven Comes On But Wont HoLd Temp Do I Need To Replace Control Panel Or ..."

Oven Wont Hold Temp