[Bill Dyer]

Burners working. Oven not getting hot > Checked circuit breakers -fine. Is there an internal fuse?

[patron]

Hellon Bill Dyer,

I haven't been able to locate this model number. Please recheck and I will also check in other locations, as it sounds like your problem is very easy.

[Bill Dyer]

No model number on the back. I looked for a name plate on the inside of the door that is where I came up with 164D3871P002. I will check some more Thanks for the reply and the interest in my problem.

[Bill Dyer]

Hey this Kenmore oven heating or not heating thing is that some button and I still haven't found the model number. Is that on the back?

[Bill Dyer]

Excuse me for not finding the model number faster on the Kenmore Stove. Bit I finallly got it! 911 93311010 I found it after moving cleaning behind it and then cleaning the door again looking for numbers while doing that, I opened the bottom which I dont use much. I then found it tucked away in what I thought to be an obscure spot.

Hope that it is the right model number so I can get working on the oven not heating up. When cleaning I did notice however the oven element is loose are they supposed to be that way?

[SINCE1972]

Usually you will find a burned wire at the back of the oven that attaches to the element.
Or you will find someone has messed with the timing feature on the clock-if this has one.
since1972

[Bill Dyer]

Yes the oven has a timer I re-read the owners manual to see it has a reset.Then I will also look for the burnt wire on the element.
Thanks for pointing a direction to look for possible problems.

[acostacade]

have a kenmore 911 oven which is not heating at all. Oven turns on ok but when desired temperature is set, it tries to heat up and shuts off. Please advise.