 Oven does not work Brand: General Electric Model Number: jkp13 Age: More than 10 years
Top & bottom elements work when connected direct to 220 volts The broil element works on clean cycle, bake does not..Broil seems to work ok but bake does not heat although the temp lights and beep signals indicate temp is at setting
The oven sensor tests out at 1060 ohms and connections are good..
The touch pad seems ok, all pads generate a light / sound response..
Only thing I have found is the high temp fan motor drags and pulls .28 amp
but do not think this the problem because it does not get that hot..
Power is ok to circuit contol panel...220 volt
I am about to give up!
Last edited by retiredracer : 11-01-2007 at 06:30 PM.
Reason: broil works after reassembly
| 
