[puki69]

My Bake element burnt up. I replaced it but neither element heats. The stove top and all functions seem to work. The control panel show the pre-heat display but the elements do not heat.

Both termal fuses are open so as a test I bypassed them. The wall CB never blew. When I turn the CB off and on, the door locks and eventually opens but the fan runs continually. I have 247V to both element relays but obviously the realys are not making.

Is there any source where I can obtain a schematic? Having to guess at which component is bad could be very expensive. Any help would be appreciated.

Ray

[PS Staff - Sheila]

If you have 247 volt to the relays but are not getting any voltage on the other side there is a problem with the relay board.

The wiring diagram should be with the range.

Here is a link to the parts of your range model 911.4658816.

Here is the part number for the relay board part number PS240005.