[ArtinBastani]

I am trying to find a replacement part for my jenn-air cp120b but am unable to determine which part i need from the diagram.

The part i need is the female part that the terminal block prongs plug into. It looks similar to the terminal block, but is larger and has a plug that extends out that look like the plug just left to the plug labeled 20 in the diagram for the cp120b.

Any ideas?

[PS Staff - Sheila]

There are two terminal blocks listed under part number 20 one is the female and one is the male.

Unfortunately the terminal blocks are no longer available.

You will have to join each wire together with a wire connector.

[ArtinBastani]

I thought the male terminal block was listed as part #27?

And my problem is not connecting the wires, its that the wires inside the female terminal block are completely melted.

What should i do?

[PS Staff - Sheila]

Is the plug you are looking for ceramic or plastic?

You mentioned part number 20 in your first post and this has a plastic connector.

Number 27 is a female connector that the element plugs into.

It is ceramic.

[ArtinBastani]

the plug is ceramic.

Below is a link to the picture of the part i am trying to replace. I hope this can help.

http://168.144.145.44/cp120b.jpg

[PS Staff - Sheila]

The harness part number is ps1515570.

I found this with the model number to the cook top unit.

The cook top model I used cm100.

The model number that you gave was for the control only.

The CP stands for control panel.

The CM stands for cook top module.