[PS Staff - Sheila]

You should get a reading of 20 ohms or close to that.

What setting do you have the meter on?

[mudminnow]

There is only one setting on my meter RX1K. When I touch leads to element it pegs all the way to the right side of meter.
Thanks,
Ed

[PS Staff - Sheila]

You said in another post that you do not get anything when you touch the lead to the spots the wires hook to.

If you are not getting a read with the meter lead there you have a faulty element.

If you have a repair shop close by they will likely check the element for you if you are not sure.

[mudminnow]

I checked it again and if you put the leads to where the wire hooks up, there is no continuity. I will carry to have it checked out.
Thanks for your help.
Ed Hooks