[dan505]

Hope someone can help! I know the procedure to replace the igniter(1 is cracked no spark), must lift stove top, but disconnect the burners first. There's 3 screws holding burner to stove top, well the screws snaped off. I stoped at one burner with 2 screws snaped, my question is can I drill out the snaped screws and replace them with a self tapping screw or do I have to replace the whole burner head a costly part ( if all the screws snap on all the burners very costly)?

[PS Staff - Sheila]

You should use what is called an easy out.

You should be able to purchase them at any place that sell tools.

[dan505]

Thanks, I'll try that, it'll have to be a very small easy out,if it works I'll save big $$. I'll let you know if it works, D