[erwin]

we have a range
wen you turn on all or any top burners the error code f-6 lights up

and the burner goes off
also no lights on control panel stove was working fine
until this occured

anyone have an answer

erwinessig@aol.com

[eric shubert]

When an F6 failure code occurs this means that either
the jumper wire is open or the mother board is defective.
To troubleshoot this, disconnect the harness from P11
and using an Ohmmeter measure the resistance between
pins 1 and 2 in the harness. If the meter reads open the
harness is defective. If the meter reads zero the mother
board is defective.