[vvs]

When I turn oven on the temperature reads 100 degrees but the oven does not turn on and does not work. Broil (high and low) and top burners all work. What could be wrong? Could it be bake ignitor? If so, what is the part number?

[PS Staff - Sheila]

Can you please check your model number as I can't locate it in our database?

The model number is located on a tag on the frame of the range where the drawer closes.

[bruug]

has there been an answer to the problem? I have the excat same issue.

[2WhiteHummers]

Originally Posted by bruug

has there been an answer to the problem? I have the excat same issue.

Well we have the same problem.... we have a GE Profile Mod.: JGSP31GER2WG S/N: ZG224466Q When the oven is set at any temperature the digital readout shows the oven temperature slowly climbing to the set temperature but the oven internal temperature maybe reaches 250 when the readout shows 525. I have changed both thermocouples the oven has with no change in temperature results. Incidently, the cituation has deteriorated to the point the oven will only get warm. My wife did tell me that when the oven was put on "self cleaning" it did get very hot, but since the door locks she could not tell how hot it got. The only thing I see left to change is the circuit board. Any help would be great! Blessings, IB

[sheldon504]

I have the sam problem with my JENN AIR FCG2040B. When I turn oven on the temperature reads 100 degrees but the oven does not turn on and does not work. Broil (high and low) and top burners all work. This happened just after I did a self clean. Any help would be great... Thanks

[skippyro]

Can someone please answer this question I have the same problem