[manisa]

Hi,
I would like to know the details on how to replace the halogen lamp in this built-in microwave model 36363693302.
Thanks
Sathya

[luxlighting]

Nowadays led has spread very quickly in every corner ,such as household ,showroom ,hotel ,entertainment ,etc .And in car ,after first led bulb used in Audi car ,it spread also quick in car lighting .

Lux led lighting dedicate himself in Household bulbs & autobulbs ....

1. Household bulbs ( MR16 3*1W (Luxeon chip ,50-60Lumens/W .equivalent 60-75w incandescent bulbs .GU10 .JDRE27 ,E14,PAR20,PAR30,PAR38 bulb for choice .When use 90-100Lumens/W WeiTian chip ,it can substitute 90-100W incandescent bulbs .

2.Auto car lighting : Festoon 33mm ,37mm ,42mm ,We set low current when in 12V .and protect circuit .because once car voltage increase to 14v .it will easy run to full current even exceed it .and led will easy go die .

3 .Led project lamps : point lamp ,wall washer ,underground lamps .

Also choice of led is an important process .

if further interests in these products ,kindly send us an e-mail and tell us

danny@luxledlight.com ...danny duan

[AmpDraw]

"luxlighting" ^ is a spam bot, ignore that and do not send any emails to that non sense.

It looks like there is an access hole possibly in the bottom of this unit to get in and change the bulb...

KENMORE ELITE | Model #36363693302 | MICROWAVE | SearsPartsDirect.com from Sears

Click on Oven Cavity Parts in the link above.


When you look on the bottom of it do you see anything like that. partselect doesn't have anything listed for this model so you'll have to use the sears link above to see what I'm talking about.

I've never worked on this particular model so I'm just making a best guess by looking at that drawing. The bulb itself looks like it either twists in, or one side of the holder is spring loaded and you push the bulb to the side and pull it out.

The most important thing here, when dealing with halogen bulbs like this is that you do not touch the bulb at all with your bare fingers. Just a light touch from your skin will get oil on the glass surface and once it comes on will swell up and break where you touched it. You need some kind of clean gloves to handle it, or at least tissue paper and a lot of care if you have no gloves handy.