[iMic]

My dryer spins but does not produce heat. I ordered a heating element kit that came with a fuse. I installed both components, but still no heat.

Also, the fuse does not properly fit in the fuse seat. When seated, the prongs are rotated 90 degrees of what they should be, and so the bracket cannot be secured to the dryer cabin without the prongs pushing agaist a metal panel on the wall of the cabin.

I've confirmed that this is the right part.

Any ideas?

Thank you.

[PS Staff - Sheila]

Check to make sure that you have 240 volts to the dryer.

If you do not check your fuses or circuit breakers in your home.

If these check fine check for burnt wire in control panel, motor switch and line into the dryer.

It could also be the contacts in the timer.

Here is a link to your dryer model PYE4557AYW.

[iMic]

This does not address the fact that the thermostat does not fit in the existing dryer. The inner piece is rotated 90 degress the wrong way.

[PS Volunteer - Appguy]

You must use a meter to check out dryer!