No Heat-what do I replace

MichaelRose · 10-18-2007, 05:41 PM

Everything works fine - drum tumbles, blows fine. The IGNITOR glows, but there is no gas flowing to light. After about 3-4 minutes, the glowing stops. Then it will glow again after about a minute or two. Again - there is no gas flowing to light. Gas pressure to the dryer is good.

PS Staff - Sheila · 10-23-2007, 02:11 PM

The valve is likely not opening so you will have to replace the valve or the coils on the valve.

Here is a link to your dryer model DG27A5WAFB.

No Heat-what do I replace

"Everything works fine - drum tumbles, blows fine. The IGNITOR glows, but there is no gas ..."

No Heat-what do I replace