[chambers04]

im trying to fix my old kenmore dryer... i tool it apart, not knowing what the problem was, found the problem, ann now im trying to put it all back together again... and i am trying to put the belt back onto the tensioner and motor, and the tensioner came off and for the love of everything that is good in the world, i cannot figure out how it goes back on... PLEASE HELP!!!!


~Chuck

[bettyboop]

Put the idler pully in the slots inline with motor pully, pully on the idler towards the drum, now with the belt groves to the drum, pull some belt slack thru the rectangular hole under the idler. Spring the idler towards the motor pully till the belt fits, make sure the felt seal on the back of the drum doesn' get folded over.
Bettyboop