[KC10566]

My Kenmore gas dryer tumbles, but does not heat up at all. So far, we cleaned out all the lint from the chute and 'hose' to the outside. We have also replaced the thermal fuse and a cycling thermostat, but the dryer still will not heat up.
Unfortunately, we cannot find any manual for this machine. Tried the Sears website, but that wasn't much help. Can you help?
Thanks!
KC10566

[PS Volunteer - Chad]

you need a meter so you can check for power at the element and also check continuity of the element. Maybe if not you could just pull the leement and at least look for a break in it.

- Chad

[Bob Drake]

Chad
Inglis IA7670 front loader gas dryer 14 years old - same symtoms as Kenmore above - I will chk wiring, ignitor element as recommended for breakage / meter voltage - I suspect its the gas ignition unit is done - dirt or lint have been cleaned out / nothing observed during starting cycle - pricing about 190.00 canadian for new unit ... thanks for tips

[denman]

For a wiring schematic and timing diagram check in the control panel.
Sometimes they put it there, bless their hearts

Which thermal fuse did you change?
The parts breakdown shows two
Kenmore Parts for Models 11072612101
The white one on the blower usually removes power to the whole machine

[scuba]

my dryer tumbles no heat replaced themo fuse still no heat now what its a gas kenmore 8 yrs old