[tpfkakatman]

Dryer will not start. Breaker is OK and power (220V) confirmed at outlet. Door switch continuity check OK. What's next to check? Thermal fuze? Is there one and how to get to it and check it? Timer / on-off switch? Also, I checked the conteol panel. It is a single unit for both the on/off and timer switch. Nothing looks burnt and no loose wires, etc. Any help greatly appreciated.

[eric shubert]

are you sure that is the model or are you reading it off of the booklet model should be inside door.

[tpfkakatman]

I had called and asked my daughter for the model number and she read it off the book. The ACTUAL model number from the door panel is PYE2300AYW.

Any help or clues would me most appreciated.

[eric shubert]

there is a thermofuse on the line to the motor. If you pop the top off (should be two clips holding top down that need to be pushed in with a stiff putty knife) on the back wall you will see the heating element and two limits. the one on the side is bad. check out part number PS177300 at PartSelect.com should fix your problem

[sharrychrist]

Hi, this post is very informative; however I would like some specific information. If someone can help me then please send me a private message. Best Regards,