[brdmnbrnd]

My dryer tumbles, but won't heat. I need to know how to get to the fuses and Heating element.

[kayakcrzy]

All you have to do is get a putty knife, and slide it under the top, on the right side, about 2 inches from the end, and there is a clip under there. Push in the putty knife, and hit the clip, and then pull up the top on that side, and then do the same on the left side, and push the top back up against the wall. Make sure the dryer is unplugged while you do this. Then everything will be in the back up top to check. If you need me you can reach me at my web site at ApplianceEducator.com Tom