Yes take the filter out, and then take the 2 phillips head screws out, and then get a putty knife and stick it under the top on the right side about 2 inches from the end, and pop the top up on that side, and then do the same on the other. Then you need to take the front off, look in on the right side inside the front up top, and take out the 5/16 screw, and then do the same on the other side. Then pull up on one side of the front, and then the other side, and then remove the wires from the door switch, and get the front out of the way.Reach in and take the belt off, and then pull the drum out. Now I want you to buy the drive kit. It has 2 rollers, 1 idler pully, and a belt. I will send you my bill in the mail. If you need me you can reach me at my website at ApplianceEducator.com Tom | 
Dryer makes grinding noise 
