[notsohandy]

This maytag performa is about 5 years old and now it is blowing fuses in the wall panel.Some times it run fine and at other times it blows the fuse within 2 minutes of starting.There is no sign of heat on the blown fuses-like darkened areas.
No blockage in ventilation etc.It always blows the heater element circuit fuse
I would appreciate a solution to this problem
Thanks in advance.

[bettyboop]

Take the front off and clean all the lint out of vent pipe and around blower wheel. also look for a bra underwire touching element or wiring touching metal and shorting temporarely

[denman]

Would also check to make sure the blower squirrel cage is not slipping on the motor shaft

Could also be a thermostat is not not regulating the temperature