My kenmore dryer heats but wont tumble. Belt is in good condition with good tension, start switch tested ok but dryer will not tumble. What could be the problem?
I'd check and see if you're getting power down to the motor, if you are getting power to the motor and its not running then the motor is bad. If your not getting power to the motor but it is heating then its likely the timer that isn't sending power to the motor and this timer would be your likely cause of the problem.
partselect.com doesn't show your models parts breakdown, just a parts list for this one. If you want to look at an actual breakdown to help you see what parts are where on this then Sears does show the breakdown here...
Dryer heats but wont tumble 
