[smithvolt]

oNLY PROBLEM IS BELT IS SLIPPING WHEN LOAD IS IN DRYER.
I CLEANED BELT, pROBLEM RESOLVED TEMPORARILY. i WANT TO TEAR DOWN DRYER AND REPLACE BELT. DI I HAVE TO REMOVE THE DRUM OR CAN I SLIP A NEW BELT ON ? hOW DO i GET TO THE BELT?

R. L. SMITH

[kayakcrzy]

You do not have to remove the drum, but you do have to take the blower housing off. Once you get the front off, the housing has four 5/16s screws holding it in place. 2 on the right side, and 2 on the left side. Once you get that out, then you can put the new belt over the tub. While you have the blower assembly off, clean it out. If you need me you can reach me at my web site at ApplianceEducator.com Tom