Real easy. Unplug the dryer, and get a putty knife and stick it under the top on the right side about 2 inches from the end, and pop the top up on that side, then do the same on the other side. Lay the top back up against the wall. Now look on the inside of the front panel, about 6 inches down and you will see a screw, take it out, and there will be 1 on the other side. pull the front toward you, and take the wires off the door switch, and remember where they go. Then lift the front up and off. Reach in the bottom and take the old belt out, and put the new one around the drum, with the rib side down. I believe on your model there should be a small access panel in the back on the bottom of the dryer, and take the screws out, and pull the panel away, and put the belt on right there. If you need me you can reach me at my website at ApplianceEducator.com Tom | 
Belt broke on dryer 
