 Water left in bottom after cycle. Brand: Maytag Model Number: MDB7600AWW Age: 1 - 4 years
Hello,
We have a dishwasher that has water being left in the bottom of the tub after it's done with either a clean cycle or just a rinse cycle.
I have checked the drain hose and pump by disconnecting it from the air gap and holding in the sink on a rinse cycle, it seemed to have good flow, and towards the end I could see the pump in action. At the beginning it was removing just a solid flow of water that became a trickle towards the end of the cycle. I removed the hose from the bottom of the dishwasher, and checked the flowback flapper, which seemed to be working fine.
I located the parts page Maytag MDB7600AWW and took apart the parts in the bottom, and checked for debris, which I cleaned out.. That was nasty.. Also, I checked the additional flowback flapper piece at the drain, as well as checking inside the top of the drain. After that I ran a complete cycle but, there was still water left in the bottom.
I'm wondering what else I can check, I thought about the timer, but I wanted to ask first.
Bill | 
