[Artrageous]

I had turned my dishwasher on and it started, later when I went to empty it I found the dishes still dirty and the bottom of the pan filled with water. It ran the first wash cycle and started the second cycle but then stopped.

I removed the water with towels and took apart the drain to see if any food had gotten stuck. (this had caused problems in the past) It was clear. I put the drain together and when I went to try and restart the machine nothing happens. I hit reset and it stays lit for a few minutes then shuts off.

Any thoughts would be appreciated.

[PS Staff - Sheila]

Check the door switch to make sure that it is closing.

If the switch checks to be OK the problem my be in the control.

Here is a link to your dishwasher model GSD4210X65AA.

[Artrageous]

Thanks Shiela, the door switch is closing. What control part do you mean? Possibly the power or the signal board?

Mark