Dishwasher won't run through any cycle Brand: Kenmore Model Number: Elite 665 Age: 1 - 4 years I have a Kenmore Dishwasher that will not run through a full cycle. The unit starts and the tub fills with water. When it tries to start the wash portion, the unit hums for a couple of seconds and then stops. After about 30 seconds, it tries to continue and then stops again. This just repaeats and nothing gets done. During this time, the cycle clock does not advance as it did during the fill portion. When I press Cancel, the unit will drain but here again this may take several tries as the unit will shut off at times as if there is an overload on the motor.
I thought something was stuck, so I cleaned out the drain area and the impeller, etc. This did not help. Thus, I thought the motor must be shot - i.e. too weak to turn the pump/impellor. I bought a new motor and installed it only to find that nothing had changed. The motor cost about 50% of the cost of the dishwaher. I like the dishwaher but don't know what else to check. |