Dishwasher reading "CL" --won't start

Ugafishman · 07-23-2007, 02:48 PM

Status window reads "CL". shows the cycle, but will not run. We had a lightning storm on Friday 07/20/07 and dishwasher has not run since.

PS Staff - Sheila · 07-24-2007, 05:21 PM

It is likely the there was a power surge and the electronic board will have to be replaced.

Try shutting the power to the dishwasher off and then back on. If the CL shows back up in the window replace the control.

Can you please verify your model number?

Ugafishman · 07-24-2007, 06:58 PM

I cut the power, same reading, "CL", does not start.

Model # is FDB2810LDC1, sorry.

Ugafishman · 07-24-2007, 07:00 PM

Please let me know exactly what part to replace.

PS Staff - Sheila · 07-25-2007, 11:38 AM

Here is a link to your dishwasher model FDB2810LDC1.

The control board is number 3 on the control panel breakdown.

Ugafishman · 07-26-2007, 02:45 AM

That did it. Replaced it this afternoon and everything is fine. Thanks for all your help!!

Dishwasher reading "CL" --won't start

"Status window reads "CL". shows the cycle, but will not run. We had ..."

Dishwasher reading "CL" --won't start