[madisonfish]

Did a load yesterday on "short wash". All appeared okay, however there is about 2" of water in the bottom of the tub & the DW is unresponsive. Push a key, nothing. Power from house is good, power to door switch is good.
We replaced the main board on this about 3-6 months ago.
Thanks!

[denman]

Do not have a schematic for this unit so some guessing is involved.

Since you know there is power at the door switches, I assume you have a meter.

The most common cause of this problem is the door switch, un plug the unit and check switches for continuity.

Here is a link to a parts breakdown
Whirlpool KUDS24SEBS3 Parts List

If you look at the Door And Latch section, you will see a fuse (Item 22) on the board. Remove and check this for continuity